G&W Electric Gas Insulated Switch 15 KV 600 MAIN / 200 TAP AMPS – Unused Surplus

SKU: 0520-31-S134 Category:

Description

Product Description
 

G&W Electric Gas Insulated Switch 15 KV 600 MAIN / 200 TAP AMPS – Unused Surplus**

This Pad-Mounted Switch is sold AS-IS*.
Please review our AS-IS Return Policy before you purchase this item. Need help? Do you have questions about this product? Call: 800-887-6937 (M-F 8am-5pm) or Email: support@breaker.com
CONTINUOUS CURRENT RMS : 600 MAIN / 200 TAP AMPS
RATING : 15 KV
ENCLOSURE : NEMA 3R
CATALOG NUMBER : PV142-376-12-9F
SERIAL NUMBER : 629-93-0070R
GAS REQUIRED : 19.5 LBS (SF6)
G&W Electric Typical Specifications
The switch shall consist of manually operated, load interrupting, SF6 insulated, 630A linear puffer switches and manually operated, electronically controlled, fault interrupters. The switches shall be designated G&W TNI style, incorporating internal ground position for both the load break and fault interrupter ways. 
G&W Electric Pad Mount Enclosure
The enclosure shall be fabricated of 12 gauge galvanized steel and manufactured to ANSI C37.72 and C57.12.28 standards. The enclosure shall be tamper resistant incorporating hinged access doors with pentahead locking bolts and provisions for padlocking. The enclosure shall be provided with lifting provisions and painted with a Munsell 7.0GY3.29/1.5 green finish. 
G&W Electric Maximum Operator Safety
SF6
 gas is a nontoxic, nonflammable switching dielectric.
Dead-front switch construction eliminates any exposed
live parts. Spring-assisted mechanisms assure quickmake, quick-break operation. Viewing windows permit visual verification of open or closed contacts.
Tamper-resistant enclosures utilize penta-head bolts
and padlocking provisions. Motor actuators are available permitting remote operation. The result is maximum
operator safety.
G&W Electric Minimal Maintenance
G&W SF6
 switches are corrosion-resistant, totally sealed
and factory filled. No more field adjustments of critical
contact areas or concerns with environmental contamination or intrusions. A periodic check of the pressure
gauge is all that is required. Galvaneal type enclosures
assure maximum corrosion resistance.
*This product is sold on an AS-IS basis at the request of the buyer. No service, repair, or testing has been performed on this item. ROMAC expects that the buyer will provide reconditioning and testing to this product prior to installation or use. ROMAC does NOT recommend this product for installation or use without full reconditioning and testing.

**Unused Surplus products have never been put into service but may show signs of wear due to storage.